The groove is open

Grooving is a rectangular cut not to the full depth of the material, which is carried out on the plane or at the end of the part, preferably with a certain offset from its beginning. According to the type of groove, it can be open (cut) and closed. The minimum size of the part for this service is 200x70 mm. The maximum size is 4200x1350 mm. The minimum groove width is 3.2 mm (saw width). The maximum depth is 11 mm. The yardage and calculation of the service depends on the width of the groove. If its width is 6.2 mm, the service is performed in 2 passes. If the width is 6.4 mm, the service is performed in 3 passes (as there is a saw overlap of 0.1 mm). The calculation is carried out according to the length of the groove. The width from 7 mm will be performed using a different technology, namely a milling cutter. Accordingly, this is another service, "Plane milling (not through)".